Steve On Java

I had a great team hacking with the JUGICE members in Iceland last night as the first stop on the Nordic NightHacking Tour. They created some pretty cool projects in JavaFX for the Raspberry Pi within only a few hours (many of whom had never tried JavaFX before):

You can see that these guys are real geeks (Pacman), but have the weather on their mind quite a bit (Snowplow), so why are they in Iceland? Here are some of the reasons I came up with for being a hacker in Iceland:

1. Tired of Monitor Glare

In the winter Iceland only has 4-5 hours of sunlight, so forget about fancy anti-glare screens or fighting with the blinds… you won’t need it in Iceland!

2. You Aren’t Good at Sharing Bandwidth

There is nothing I hate more than my neighbors slowing down my Java update by playing games or downloading movies. In the U.S. they typically oversell bandwidth in the hopes that most consumers won’t use it. In contrast, Iceland is one of the top countries in the world for internet access with over 8% of the broadband connections using optical fiber and 626.8 Mbit/s per 10,000 population. My informal test at the JUGICE meeting broke the speed test, hitting their max test threshold of 100 Mbit/s on both download and upload!

3. You Like Your Sushi Properly Aged

Sushi is a great food for hackers, but it can be dangerous if it is not fresh enough. Fortunately, the Icelandic people have perfected the art of fish preservation so you don’t have to worry about your wind-dried fish, shark, or seal’s flippers going bad.

Yum, Harðfiskur!

4. Your Home Supercomputer Cluster is Destroying the Planet

You need good tools to do hacking, and that often comes at the price of power conservation. I am pretty sure every time I run a compile on my beefy quad-core system, the temperature of the earth goes up by a fraction of a degree. Fortunately, in Iceland all the power comes from renewable geothermal sources, so you can run your very own supercomputer cluster in your basement!

Note: You don’t really have to move to Iceland to do this, because the folks at Green Cloud have figured out how to package this up as a service so you can remotely take advantage of Iceland’s renewable natural resources.

5. You’ve Always Wanted to Meet Gosling’s Cousins

Iceland has a complete genealogy tree dating back to the Norwegian settlers in the 9th century, and geneologists say that all Icelanders are descendants of bishop Jón Arason. James Gosling is half Icelandic on his mother’s side, so when he went to visit last time he was surprised how many cousins he had! Maybe it is worth a trip just to visit all 320,000 of the relatives of the Father of Java.

I certainly had a great time in Iceland and would recommend at least a visit.

In the meantime, join the rest of the live-streamed trip throughout Northern Europe on the NightHacking Nordic Tour:

http://nighthacking.com/

The long awaited early access of JavaFX on Raspberry Pi is finally out.  This is a great platform for doing small embedded projects, a low cost computing system for teaching, and great fun for hobbyists.  It only costs $35 for the Model B version with 512MB RAM, 700MHz ARM processor and I/O for HDMI, Composite, Audio, Ethernet, and 2 USB ports.

So what can you do with JavaFX on a Raspberry Pi?  A great example is the digital signage that we put together for Devoxx showing the conference schedule flying by on animated space ships:

Update: And if you are not convinced that Java is performant on the Pi, check out Rich Bair’s post on fxexperience.com: http://fxexperience.com/2012/12/javafx-on-raspberry-pi/

So if you are convinced to get started, there are 3 easy steps to get JavaFX running on your Pi:

1. Install Linux on your Raspberry Pi
2. Download and copy Java/JavaFX 8 to your Pi
3. Deploy and run JavaFX apps on your Pi

This does assume you have a Pi…  For questions about where to get a Pi, how to power it, etc., I would recommend checking out the Raspberry Pi Site.

Step 1 – Installing Linux on Your Raspberry Pi

The latest Java 8 release is hard float, which is a good thing, because it gives you better performance and the recommended Raspberry Pi build is also hard float.  Stay away from anything that says soft, softfp, etc., because it will be incompatible with the hard float JVM.

Note: Why all this fuss over floating point?  Well, low power embedded systems skip the floating point hardware to save cost (e.g. ARM Cortex M0-M3).  Fortunately the ARMv6 chip used in the Raspberry Pi has real floating point support.

To setup Linux on your SD card, you will need a Windows, Mac, or Linux desktop with an SD Card Reader/Writer.  The distribution you want is the latest Raspbian Wheezy hard float build, which is the recommended install on the Raspberry Pi download site:

http://www.raspberrypi.org/downloads

To burn the image you have a few options, which are detailed here, but basically boil down to:

• Windows: Use Win32DiskImager
• Mac: Use the RPi-sd Card Builder
• Linux: Use the dd command

Once your SD card is created, take your Raspberry Pi out of the box, pop in the SD Card, hook it up to a monitor or TV lying around your place, and plug it up to a nice usb power brick (5V 700mA or greater).

Warning: Order Matters! – If you don’t hook up an HDMI monitor before powering on the Pi, it assumes composite.  This means if the lights are flashing but you get a blank screen, you should try rebooting the Pi (by unplugging and replugging it in).

At this point, your Pi should bootup and show you the Raspberry Pi config screen.  There are some things you might want to consider tweaking here, including:

• CPU/GPU memory split – Give the GPU at least 128MB of ram so graphical heavy apps will run better (important for JavaFX!)
• Change the locale/keyboard/timezone – Default settings are for the UK, so everyone else should change these or you will be cursing at your keyboard when trying to type punctuation!
• Overscan – If your display has black bars around the edges, turn this off so you can use the full resolution.
• Expand root filesystem – It can do an online resize of your card to use the full space (default image has a tiny 2GB root partition).  Highly recommended, but expect this to take a while on a large card.
• SSH – Turn this on if you want to access your Pi over the network (this is the only way to shut down rogue JavaFX processes short of rebooting)

In the official JavaFX Raspberry Pi docs they also recommend hacking the framebuffer to be 720p in the config file (/boot/config.txt) by uncommenting these lines:

framebuffer_width=1280
framebuffer_height=720

This is not strictly required, but will give you better performance since the Pi is pushing fewer pixels.  If you are going to do this, you might also want to force the Pi to run in 720 resolution as well to avoid pixel upscaling.  Don’t try hacking the display settings unless you know what you are doing (and have an ssh terminal to login remotely in case you kill the display).  For more info about the HDMI display nodes, check out the docs here.

Step 2 – Download and Copy Java/JavaFX 8 to Your Pi

You can download a Raspberry Pi compatible Java/JavaFX 8 build here:

http://jdk8.java.net/fxarmpreview

If your Pi is hooked up to the network via ethernet you can download it directly to the device.  Otherwise copy it over using sftp (via ssh) or sneakernet (a USB key).

Once you have it downloaded, you can unzip it to a location of your choice:

sudo tar -zxvf file_name -C /opt

And then to run java use a command like the following:

sudo /opt/jdk1.8.0/bin/java -version

Step 3 – Deploy and Run JavaFX Apps on Your Pi

Almost any JavaFX desktop application will run on the Pi simply by copying over the jar file and executing it locally, with no modifications.  (The 2 exceptions to this are applications that rely on WebView or MediaView, both of which are unimplemented in the current dev preview)

A great way to get started building JavaFX applications for the Pi is to use Scene Builder to quickly put together a user interface visually, and then deploy that to the Pi.  I did this last night at the Linux Users’ Group of Davis (LUGOD), quickly putting together a sample application with help from the very astute attendees (I also learned a thing or two about linux command tricks along the way from the audience).

I posted our 15 minute application in GitHub as an example you can try:

https://github.com/steveonjava/LUGOD-Pi-Test

To run it on the Pi, build the source with your favorite IDE (or straight form the command line) and build a jar file.  Then copy the jar file to your Pi and run it with a command like the following:

sudo /opt/jdk1.8.0/bin/java -Djavafx.platform=eglfb \
-cp /opt/jdk1.8.0/jre/lib/jfxrt.jar:LUGODTest.jar lugodtest.LUGODTest

Here is a picture of the Scene Builder project and the output we got on the Raspberry Pi during the LUGOD meeting:

However, the most impressive demo is your own.  Try deploying your own JavaFX applications and leave others pointers to apps you have deployed in the comments below!